everbilt sliding door hardware installation instructions
renin barn door instructions
smartstandard barn door installation instructions pdf
barn door hardware installation instructions
how to hang a barn door on drywallnational hardware barn door installation instructions
installing barn door over trim

*Header board and anchor screws not included. Center Line of track mounting holes. Internal bracing. Page 5Drill 7/64" pilot holes to approximate length of screws. STEP 6. Hang doors on track, installing the rear door panel first. Door panel must be angled to. Install the inside or rear door panel first. The door panel must be angled approximately 15 degrees to engage the track. For 3/4" thick doors (770 only) install Unscrew to separate the carriage bolt and anchor to install correctly, securing with a wrench. BARN DOOR HARDWARE KIT - FRONT MOUNT. INSTALLATION INSTRUCTIONS. Insert Stops on either side of track, inside the first & last hole. 4b. Position center of the track by measuring up from the floor. (door height + 1 ¾”). Align If installing Soft Close feature refer to. Soft Close instructions before mounting track. Install track with bolts, washers and spacers using 13 mm wrench. ( However, to install these doors, contractors and interior designers must consider the form and function to match the right track and door. Any problems with This manual covers the installation of our barn door and hardware. Contents All track systems must be attached to interior blocking or a head casing.